Welcome to Nanolab. We design, develop and manufacture nanoscale materials and devices.
  Home About Us Resources Products Services Contact Us

Click to enlargeSingularity LT-AERO is a sprayable, low temperature activating formulation of Singularity, suited to application on metals, composites, polymers, etc., and suited to the needs of the Aerospace community. It is activated by brief heating to ~120C (212F), which can be accomplished with a hair dryer or heat gun, or a bakeout . For full vacuum service, we recommend a second thermal treatment with ramp rates at ~100C/hr to 250C, and a 1hr soak. Parts with this treatment will absorb 99% of visible light, and have low outgassing properties. Contact us for an SDS.
Application: Customers must consult with NanoLab personnel before working with the paint to ensure good results and safe practices. We also offer part coating services. Pricing does not include ground hazmat shipping to the continental United States. Contact us for international orders. .Coverage ~1000 cm 2 (~12"x 12") Safety: When Singularity is sprayed through an air brush, the aerosolized particles contain the polymeric binder, the carbon nanotubes and the fugitive solvent. These polymer-bound particles should not pose a health risk, but caution is warranted with any new material. Droplet sizes we have measured are typically larger than 5 microns, but other sprayers may differ in aerosolization. A respirators with a National Institute for Occupational Safety and Health (NIOSH) rating of P95 or greater have been shown to prevent the inhalation of CNTs under normal breathing conditions, and is mandatory safety equipment. The properties of nanotubes are not yet well understood, so use caution.
PLEASE NOTE : Due to the special packaging required to ship flammable liquids, we do not accept returns of Singularity Black LT.
Please discuss with NanoLab if there is a concern about shipping.

  • Selecting Respirators

  • NIOSH-2009 Instruction
  • LT Singularity Use overview -- pdf

    Terms & Conditions: We encourage respectful, collaborative relationships between NanoLab and our Customers. Customers agree not to repackage or resell any NanoLab Products. We want to celebrate your achievements. By purchasing NanoLab products, customers agree to credit NanoLab as a supplier, in both technical articles and works of art, wherever appropriate and feasible. Customers agree that NanoLab may also release this information. Should secrecy be important to a particular application, contact us to put a nondisclosure agreement in place.

  • NanoLab
    updated: 03/29/2017